Specific changes of the uterine cervix due to contraceptives]

A group of 344 cervices, produced by conisation within a period of 5 1/2 years, were examined for specific effects of contraceptives. In half of all women, who used oral contraceptives, specific lesions such as "siebartige polypoide Hyperplasie" (cribriform polypoid hyperplasia) were found. The findings and their etiology and importance are discussed.     

Polyaniline and polypyrrole modified conductive nanocomposites of polyfuran and polythiophene with montmorillonite clay

Nanocomposites of polyfuran (PF) and polythiophene (PTP) with montmorillonite clay (MMT) were prepared and modified by loading of polyaniline (PANI) and polypyrrole (PPY) moieties via polymerization of aniline (ANI) and pyrrole (PY) in aqueous dispersions of PF-MMT and PTP-MMT nanocomposites. Formation of PANI and PPY and their subsequent incorporation in the PF-MMT and PTP-MMT composites was confirmed by FTIR absorption studies. X-ray diffraction (XRD) patterns of PANI and PPY modified PF-MMT and PTP-MMT composites showed that PF-MMT and PTP-MMT intercalates were still present in the modified composites. Scanning electron microscopic analysis revealed distinctive morphological patterns of the various composite particles. The dc conductivity values of PANI and PPY modified PF-MMT and PTP-MMT composites were in the order of 10⁻² S/cm in either system – a value much improved compared to the same for both of the unmodified PF-MMT (10⁻⁷ S/cm) and PTP-MMT (10⁻⁵ S/cm) nanocomposites respectively.     

Pervasive computing: a paradigm for the 21st century

Pervasive computing promises to make life simpler via digital environments that sense, adapt, and respond to human needs. Yet we still view computers as machines that run programs in a virtual environment. Pervasive computing presumes a different vision. A device can be a portal into an application-data space, not just a repository of custom software a user must manage. An application is a means by which a user performs a task, not software written to exploit a device's capabilities. And a computing environment is an information-enhanced physical space, not a virtual environment that exists to store and run software. Pervasive computing is close to technical and economic viability.     

Experience with return voltage measurements for assessing insulation conditions in service-aged transformers

This paper describes the investigation of the insulation condition of a number of power and distribution type transformers of different manufacturing dates and with different operating histories. Return voltage measurements were conducted for these transformers. Effects of moisture and aging on the oil-paper insulation of these transformers were investigated and results are presented in this paper. Moisture in oil samples at known temperature was measured for these transformers. Previously accelerated aging experiments were performed on paper wrapped insulated conductors in different environments over a temperature range of 115 to 145/spl deg/C. Results from the measurements on transformers are compared with those of the accelerated aged samples and are described in this paper.     

Science and Technology of High Dielectric Constant Thin Films and Materials Integration for Application to High Frequency Devices

Thin films of Ba_1?x Sr _x Ti_1+y O_3+z (BST), were fabricated using both by RF-magnetron sputtering and MOCVD to demonstrate application to high frequency devices. Precise control of composition and microstructure is critical for the production of (Ba _x Sr_1?x )Ti_1+y O_3+z (BST) dielectric thin films with the large dependence of permittivity on electric field, low losses, and high electrical breakdown fields that are required for successful integration of BST into tunable high frequency devices. Here we review results on composition-microstructure-electrical property relationships of polycrystalline BST films produced by magnetron sputter deposition that are appropriate for microwave devices such as phase shifters. BST films with a multilayer structure were also developed with different Ti-elemental ratio in each layer to minimize losses and leakage current. Interfacial contamination from C and H species was studied and implications on electrical properties are highlighted. Finally, York's group at the University of California-Santa Barbara successfully integrated our BST films onto phase shifter arrays. The results show potential of BST films in such applications. Results from initial work on the integration of Cu-electrodes with BST films are also presented.     

Investigation on condensation in presence of a noncondensable gas for a wide range of Reynolds number

A theoretical model has been developed to study the local heat transfer coefficient of a condensing vapour in the presence of a noncondensable gas, where the gas/vapour mixture is flowing downward inside a vertical tube. The two-phase heat transfer is analysed using an annular flow pattern with a liquid film at the tube wall and a turbulent gas/vapour core. The gas/vapour core is modeled using the analogy between heat and mass transfer. The model incorporates Nusselt equation with McAdams modifier and Blangetti model for calculating the film heat transfer coefficient, Moody and Wallis correlations to account for film waviness effect on gas/vapour boundary layer. The suction effect due to condensation, developing flow and property variation of the gas phase is also considered. A comparative study of heat transfer coefficient and vapour mass flow rate has been made with various models to account for condensate film resistance and condensate film roughness. Results show that for very high Reynolds number, the condensation heat transfer coefficient is higher than the film heat transfer coefficient.     

Elastic and elastic-perfectly plastic analysis of an axisymmetric sinusoidal surface asperity contact

ABSTRACT

Closed-form finite-element empirical models are available for elastic and elastic–plastic spherical and sinusoidal contact. However, some of these models do not consider the effect of interaction with adjacent asperities or require extensive numerical resources because they employ a full 3-D model. Therefore this work has analysed and quantified the behaviour of an elastic and elastic- perfectly plastic axisymmetric sinusoidal surface in contact with a rigid flat for a wide range of material properties and different values of the amplitude to wavelength ratio from initial to complete contact (high load). The numerical results agreed well with the Hertz model and the Jackson–Green elastic–plastic spherical contact model at low loads. Empirical equations for elastic and also elastic-perfectly plastic cases are formulated for the contact pressure, contact area and surface separation. From the current analysis, it is found that it is not any single parameter, but different combinations of material properties and surface roughness that govern the whole contact behaviour. The critical value of the amplitude of the sinusoidal asperity below which it will deform completely elastically from initial to complete contact is established. At low values of amplitude normalized by the critical amplitude, it was found that the contact behaved similar to a spherical contact, with the average pressure (hardness) always remaining lower than three times the yield strength. However, at higher values the average pressure increased toward a value as high as six times the yield strength at complete contact. All of these equations should be useful in rough surface contact modelling, lubrication analysis, electrical contact modelling and in many other applications.     

The Effect of Distribution on Product Temperature Profile in Thermally Insulated Containers for Express Shipments

An uninterrupted cold chain is a continual series of storage and distribution activities that maintain a specific temperature or temperature range. Cold chain solutions typically involve excessive packaging to ensure that the desired product temperature is maintained through the distribution process, thereby increasing the logistics‐related costs. There is a myriad of solutions available for shipping temperature‐sensitive products, including those constructed with a variety of packaging materials as well as refrigerants. Although static characteristics for thermally insulated packaging solutions such as the R‐values of package systems as well as the melting points and heat absorption rates of various refrigerants have been studied in the past, none of the past studies have evaluated the effect of comprehensive distribution on the reliability of the cold chain packaging solutions. This research was undertaken to study the temperature profiles for factors such as different densities for a given thickness of thermally insulating material, wall thicknesses and distribution environments for four different types of materials—polyurethane, virgin expanded polystyrene, recycled content expanded polystyrene and vacuum‐insulated panels. The temperature range of 2 °C–8 °C, critical for pharmaceutical drugs and vaccines, was targeted. An interesting regression‐based finding was that the interaction between the R‐value and the wall thickness significantly influenced the length of time the thermally insulated packages stayed in the desired range of 2 °C–8 °C . The findings of this study will be decisive in designing cost‐efficient and practical single‐use cold chain transportation solutions for temperature‐sensitive products. Copyright © 2012 John Wiley & Sons, Ltd.     

Detection of cross-channel anomalies

The data deluge has created a great challenge for data mining applications wherein the rare topics of interest are often buried in the flood of major headlines. We identify and formulate a novel problem: cross-channel anomaly detection from multiple data channels. Cross-channel anomalies are common among the individual channel anomalies and are often portent of significant events. Central to this new problem is a development of theoretical foundation and methodology. Using the spectral approach, we propose a two-stage detection method: anomaly detection at a single-channel level, followed by the detection of cross-channel anomalies from the amalgamation of single-channel anomalies. We also derive the extension of the proposed detection method to an online settings, which automatically adapts to changes in the data over time at low computational complexity using incremental algorithms. Our mathematical analysis shows that our method is likely to reduce the false alarm rate by establishing theoretical results on the reduction of an impurity index. We demonstrate our method in two applications: document understanding with multiple text corpora and detection of repeated anomalies in large-scale video surveillance. The experimental results consistently demonstrate the superior performance of our method compared with related state-of-art methods, including the one-class SVM and principal component pursuit. In addition, our framework can be deployed in a decentralized manner, lending itself for large-scale data stream analysis.     

Morphology,Mineralogy and Mixing of Individual Atmospheric Particles Over Kanpur (IGP): Relevance of Homogeneous Equivalent Sphere Approximation in Radiative Models

Estimation of the direct radiative forcing (DRF) by atmospheric particles is uncertain to a large extent owing to uncertainties in their morphology (shape and size), mixing states, and chemical composition. A region-specific database of the aforementioned physico-chemical properties (at individual particle level) is necessary to improve numerically-estimated optical and radiative properties. Till date, there is no detailed observation of the above mentioned properties over Kanpur in the Indo-Gangetic Plain (IGP). To fill this gap, an experiment was carried out at Kanpur (IITK; 26.52°N, 80.23°E, 142 m msl), India from April to July, 2011. Particle types broadly classified as (a) Cu-rich particles mixed with carbon and sulphur (b) dust and clays mixed with carbonaceous species (c) Fe-rich particles mixed with carbon and sulfur and (d) calcite (CaCO₃) particles aged with nitrate, were observed. The frequency distributions of aspect ratio (AR; indicator of extent of particle non-sphericity) of total 708 particles from April to June reveal that particles with aspect ratio range >1.2 to ≤1.4 were abundant throughout the experiment except during June when it was found to shift to high AR range, >1.4 to ≤1.6 (followed with another peak of AR i.e. >2 to ≤2.4) due to dust storm conditions enhancing the occurrence of more non-spherical particles over the sampling site. The spherical particles (and close to spherical shape; AR range, 1.0 to ≤1.2) were found to be <20% throughout the experiment with a minimum (11.5%) during June. Consideration of Homogeneous Equivalent Sphere Approximation (HESA) in the optical/radiative model over the study region is found to be irrelevant during the campaign.